Black 8 Quart Double Acting Hydraulic Pump Dump Trailer Power Unit Crane Car of Set

Application Suitable for any work places where hydraulic pump is needed. Widely used in steel construction, boiler making, construction works of fuel tanks and reactors, and factories including mines, smelteries, machine manufacturers and fitter factories. Able to drive hydraulic punching machines and pressing systems. Instructions 1. Hydraulic oil level: ISO4006(:99) 18/15 or NAS1638 9-10. If petroleum products is applied, please put into use after filtration of filter oil vehicle (10-25μm). 2. Hydraulic oil suggested: ISO VG22-46 (0℃-70℃), ISO VG15 (-15℃-0℃). 3. Supply voltage: 12V DC, ±10%. 4. Make sure hydraulic components including oil cylinders, oil tubes and joints are clean and inclusion-free. 5. Check immediately whether there is enough oil in the tank during first operation. 6. Replace hydraulic oil after first 100-hour usage. Replace every 3000 hour afterwards. 7. It's appropriate to fill 90% of the oil tank. Minimum amount should not be less than 85%. Specifications Pump Type: Hydraulic Type: Double acting Power Source: 12 Volt DC Max. Relief Setting For Increased Lifting Power on A port: 3200 PSI Max Relief Setting on B port:1500 PSI Flow: 2.0 GPM Reservoir Capacity: 8 Litre Weight: 13.4kg Top Diameter: 11.4cm (4.5") Bottom Diameter: 16.5cm (6.5") Pump Height: 57.2cm (22.5") Package Content 1 X 8L Hydraulic Double Acting Pump Set 1 X User Manual

• Perfect for Dump Trailers-Lift Gates
• Perfect replacement pump for 12V DC remotely controlled hydraulic systems
• Standard duty 12V DC Motor, Hand held pendant with 20 foot removal cord
• Double acting power-up/power-down, SAE # 6 port, horizontal mount
• Fluid choice determined by operating environment/temperature